Avaya 03-300686 - Manual (Page 52)

MDF connections to stations and the public switched telephone network
52 Installing and Connecting the MDF and Telephones
Completing a provisioning plan
A provisioning plan should be completed before an installation. The plan determines an
appropriate available port circuit on the media gateway for each telephone, trunk, and
peripheral connection needed, and any auxiliary power for Basic Rate Interface (BRI) and
certain display sets.
Obtain copies of the Port Assignment Record forms (or equivalent) from the customer or
marketing representative. See
Figure 25: Port Assignment Record Form on page 53 for an
example of the form. These forms contain the port assignments and identify the extension
numbers (terminal number) of the telephones. Enter the jack assignments at the equipment
room.
The Port Assignment Record should have the following information:
●
Station or trunk type or feature/service
●
Building location (floor/room/desk/outlet)
●
Extension number or trunk group and member number
●
Port circuit location on the media gateway for each endpoint (media gateway/slot/circuit)
●
Route from equipment room through site/satellite closets to each endpoint
●
Auxiliary power supply, if required (main distribution frame (MDF), site/satellite closet, or
information outlet)