Agilent Technologies E1300B - Manual (Page 206)

SCPI Commands Quick Reference
Command Description
TRIG ger
:D ELay < numeric value> Sets delay between trigger and first Pacer pulse.
:D ELAy? [MIN| MAX] Returns current trigger delay or MIN| MAX allowable value.
[:IMMediate] Sets trigger source for timer/pacer.
:SLO Pe [NEG ATIVE] For compatibility only. Accepts only NEG ATIVE.
:SLO Pe? Returns the string NEG .
:SO U Rce EXTernal| IMMediate| BU S| H O LD Trigger source is G ET or *TRIG .
:SO U Rce? Returns current trigger source.
VXI
:CO NFigure
:D eviceLAD d? Returns a list of the logical addresses in the system.
:D eviceLISt? Returns information about one or all installed devices.
:D eviceNU Mber? Returns the number of installed devices.
:INFormation G ets the static information about the selected logical address (see
VXI:SELect).
:ALL? G ets the static information about all logical addresses.
:H IERarchy G ets the current hierarchy configuration data for the selected logical
address (see VXI:SELect)
:ALL? G ets the current hierarchy configuration data for all logical addresses.
:NU Mber? G ets the number of devices in the system when issued to a Resource
Manager.
:LAD D ress? G ets a comma separated list of all logical addresses of devices in the
system when issued to a Resource Manager.
:READ ? < logical_addr> ,< register_num> Read the contents of the device register at register_num.
:REG ister
:READ ? < numeric_value| < reg_name> Returns the contents of the specified 16 bit register at the selected
logical address (see VXI:SELect).
:WRITe < numeric_value| < reg_name> ,< data> Writes to the specified 16 bit register at the selected logical address
(see VXI:SELect).
:RESet? Resets the device at the selected logical address (see VXI:SELect).
:SELect < numeric_value> Specifies the logical address to be used by all subsequent commands
in the VXI subsystem.
:WRITe < logical_addr> ,< register_num> ,< data> Write data to the device register at logical_addr.
System Instrument
7–78 Command Quick Reference