Agilent Technologies E1300B - Manual (Page 59)

Monitor Mode Monitor mode displays the status of an instrument while it is being controlled
from remote. Monitor mode is useful for debugging programs. You can place an
instrument in monitor mode using terminal interface menus, or by executing the
DISP:MON:STAT ON command from the terminal interface. Pressing most
terminal interface keys will automatically exit monitor mode and return to the
instrument menu. However, you can use the left and right arrow keys in monitor
mode to view long displays.
How to Select Monitor Mode
SCPI commands used:
DISP:MON:CARD < card_number>
DISP:MON:STAT ON
Enter Card Number or type
AUTO and press Return
Using the Display Terminal Interface 3-11