Agilent Technologies E1300B - Manual (Page 23)

•
Press Prev Menu to return to the previous menu within an instrument
menu or escape from an input prompt. Press Select Instr to return to the
Select an Instrument menu. Note that when you leave an instrument and
return later, you return to the same menu location you were when you
left. In addition, any other displayed information (instrument responses
or commands being entered) will also be displayed when you return.
•
In addition to the menu keys, Clear Instr and Reset Instr are helpful
when operating an instrument. Clear Instr clears the instrument’s front
panel input and output buffers (remote buffers are not cleared) and
returns to the top level of the instrument menu. Press Clear Instr
whenever an instrument is busy, is not responding to front panel control,
or to abort a command being entered from the front panel. Reset Instr
clears all front panel and remote input and output buffers and resets the
instrument.
Using the System
Instrument Menu
The System Instrument menu allows you to:
•
Set or read the system GPIB address
•
Reset (reboot) the mainframe
•
Display the logical addresses of installed instruments
•
Display information about installed instruments
How to Set or Read the System GPIB Address
Using the Front Panel 2-3
GPIB
GPIB
GPIB