Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 18)

WaveAce 1000/2000
12 922131-00 Rev A
Menu Control Buttons

CURSORS - Press to turn on the cursors and display the Cursor menu.
You can use the Cursor menu to set the Cursor Mode (Auto, Off,
Manual, Track). When Cursors are on (CURSORS button is lit), turn the
Adjust knob to position the cursors. See Measuring with Cursors (on
page 39) for more information.

ACQUIRE - Press to display Acquire menu. You can use the Acquire
menu to set the acquisition Sampling Mode (Sampling, Peak Detect,
Average). See Acquisition Types (on page 29) for more information.

SAVE/RECALL - Press to display the Save/Recall menu. You can use the
Save/Recall menu to save and recall up to 20 oscilloscope setups or
waveforms in internal memory (up to 20 waveforms) or on a USB
memory device (limited by memory capacity of USB device). You can
also use it to recall the default factory settings, to save waveform data
as a comma-delimited file (.CSV), and to save or print the displayed
waveform image. See Saving and Recalling Oscilloscope Settings (on
page 54) for more information.

MEASURE - Press to display a menu of measurement parameters. The
Display Type must be set to YT mode. For more information on
measurement parameters, refer to Parameter Measurements (on page
43).

DISPLAY - Press to open the Display menu. You can use the Display
menu to set grid and waveform display styles, and persistence. See
Setting Up the Display (on page 18) for more information.

UTILITY - Press to open the Utility menu. You can use the Utility menu
to configure WaveAce features, such as sound, language, counter, etc.
You can also view system status and update software. See Utility Menu
(on page 69) for more information.