Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 97)

Operator’s Manual
922131-00 Rev A 91
4. Connect to the remote oscilloscope from Wave Studio.
Now, it's time to launch WaveStudio on your computer.

With the software launched, select Add Scope by clicking the
button for this action, which can be found in The Scope Ribbon, or
using its miniature form on the top portion of the My Scope
(Device) Explorer.

This opens the Add Device pop-up.

Click either the Network (for WaveAce 2000 models with an RJ-45
connector on the Back Panel) or USBTMC/USB488 (for either
1000/2000 models using the USB Type B connector) device
connection button. See Back and Side Connections (on page 8) for
more information.