Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 90)

WaveAce 1000/2000
84 922131-00 Rev A

X Mask - Press the X Mask option button and use the Adjust
Front Panel (on page 7) knob to dial in the desired range of
horizontal waveform clearance (0.04div - 4.00div).

Y Mask - Press the Y Mask option button and use the Adjust
front panel knob to dial in the desired range of vertical waveform
clearance (0.04div - 4.00div).

Create Mask - Press the Create Mask option button to create a
test mask with the clearances specified using the X and Y Mask
settings.

Location - Press the Location option button to select from
Internal (to store the mask into oscilloscope memory) or
External (to store the mask onto a USB memory device) Using
the SAVE ALL Screen (on page 66).

Next Page - Press the Next Page option button to show Mask
Page 2/2.
Mask - Page 2/2
After pressing the Next Page option button, Mask menu Page 2/2 is
shown which contains the following option button controls.

Save - Press the Save option button to store your mask. After
pressing, the mask is saved Internally, or the SAVE ALL screen is
shown, depending on your Location control setting (choose
Internal or External as desired on Mask - Page 1/2).

Load - Press the Load option button to retrieve a stored mask.
After pressing, the mask is retrieved Internally, or the SAVE ALL
screen is shown, depending on your Location control setting
(choose Internal or External as desired on Mask - Page 1/2).