Updating the system software – Teledyne LeCroy WaveAce 1000_2000 User Manual
Page 86
WaveAce 1000/2000
80
922131-00 Rev A
Image Size - Choose from Default, 2.5x3.25 in, L (3.5x5 in), 4x6 in, 2L
(5x7 in), 8x10 in, 4L (7 x 10 in), E, Card, Hagaki card, 6 x 8 cm, 7x10 cm,
9x13 cm, 10x15 cm, 13x18 cm, 15x21 cm, 18x24 cm, and A4, Letter
Paper Type - Choose from Default, plain, Photo, and Fast Photo.
Print Quality - Choose from Default, Normal, Draft, and Fine.
ID Print - Choose from Default, On, and Off.
Next Page - Use this option button to show Page 1/2.
If desired, press the Utility Front Panel (on page 7) button and the Utility
menu is shown.
Updating the System Software
Teledyne LeCroy periodically releases software updates for the WaveAce
providing new features, enhancements, and software corrections. These
updates are available for download from the Teledyne LeCroy website at
After registering your product, you can select the
appropriate download based on your specific WaveAce oscilloscope model.
After downloading, open the .zip file on your computer. The .zip should
contain an .ads file and the Firmware Update Procedure .pdf file.
Move the .ads file to a USB memory device.