Setting the digital filter – Teledyne LeCroy WaveAce 1000_2000 User Manual
Page 33
Advertising
Operator’s Manual
922131-00 Rev A
27
3. Press the Invert option button on page 2/3, and then select On.
Setting the Digital Filter
You can choose from the following digital filter types:
Low Pass Filter (LPF)
High Pass Filter (HPF)
Band Pass Filter (BPF)
Band Stop Filter
Use the following steps to set the digital filter.
1. Turn on the digital filter by pressing the desired channel button - CH1 or
CH2 (or CH3 or 4 on 4 channel models).
2. On the channel menu, press the Next Page option button, showing
page 2/3.
3. Press the Filter option button on page 2/3. The Filter menu opens.
4. Press the Filter option button and select On.
Advertising