Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 80)

WaveAce 1000/2000
74 922131-00 Rev A
Screen Test - Each press of the SINGLE front panel button runs successively through colors and
is how the Screen Test is performed. Move through a few colors until you are satisfied. As the
screen indicates, press the RUN/STOP front panel button to exit.
Keyboard Test - As front panel buttons and knobs are pressed and turned, the screen colorizes
their corresponding location on the test screen, indicating correct function and a successful
test. Test all of the instruments buttons and knobs as desired. As the screen indicates, pressing
the RUN/STOP front panel button three times exits the keyboard test.
LED Test - Each press of the SINGLE front panel button illuminates a front panel button or knob
and simultaneously colorizes their corresponding location on the test screen, indicating correct
function and a successful test. As the screen-shot shows, the test starts with the
Intensity/Adjust knob. Test as many LEDs as desired. As the screen indicates, press the
RUN/STOP front panel button to exit.