Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 61)

Operator’s Manual
922131-00 Rev A 55
Saving the Current Settings
1. Press the Save/Recall front panel button. The SAVE/REC menu is
shown.
2. Press the Type option button and select Setups.
3. Save your setup either to Device (meaning internal memory on your
WaveAce) or File (for storage on a USB memory device) using the
following methods.
Saving Setups to Internal Memory

Press the Save To option button to select Device.

Press the Setup... option button or turn the Adjust front panel
knob and assign a number (No. 1 - No. 20) to the setup.

Press the Save option button to save the current setup.

The setup is saved to memory and the oscilloscope briefly shows
a Store Data Success! message on the lower part of the grid
display area.
Saving Setups to a USB Memory Device

Insert the USB memory device, press the Save To option button
and select File.

Press the Save option button and the SAVE ALL screen opens
showing Directorys by default. Finish saving your setup using the
following instructions in Using the SAVE ALL Screen (on page 66).

Switch to the SAVE ALL - Files Menu .

Name and Confirm your file using the steps explained in
Creating Folders and Files .