Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 51)

Operator’s Manual
922131-00 Rev A 45

Vbase - Lower of two most probable states (higher is top).
Measures lower level in two-level signals. Differs from min in that noise,
overshoot, undershoot, and ringing do not affect measurement.

Vavg - Arithmetic mean over the first cycle in the waveform.

Vamp - Voltage between Vtop and Vbase of a waveform.

ROVShoot - (Vmax-Vtop)/Vamp after the waveform rising
transition.

FOVShoot - (Vmin-Vbase)/Vamp after the waveform falling
transition.

RPREShoot - (Vmin-Vbase)/Vamp before the waveform rising
transition.

FPREShoot - (Vmax-Vtop)/Vamp before the waveform falling
transition.