Sinx/x – Teledyne LeCroy WaveAce 1000_2000 User Manual
Page 36
Advertising
WaveAce 1000/2000
30
922131-00 Rev A
Use the following steps to choose a sampling type.
1. Press the ACQUIRE front panel button.
2. On the Acquire menu, press the Acquisition option button and select a
sampling type.
3. If you select the Average sampling type, press the Averages option
button and select the number of waveforms (4, 16, 32, 64, 128, or 256).
Sinx/x
Choose Sinx or x by pressing the corresponding option button. This turns
Sinx/x on or off, respectively.
Sinx/x interpolation is suitable for reconstructing curved or irregular wave
shapes, especially when the sample rate is 3 to 5 times the system bandwidth.
Advertising