Viewing waveforms, Turning on traces, Setting up the display – Teledyne LeCroy WaveAce 1000_2000 User Manual
Page 24
Advertising
WaveAce 1000/2000
18
922131-00 Rev A
Viewing Waveforms
Turning On Traces
Turn on a channel trace by pressing the channel front panel button - CH1 or
CH2 (or CH3 or 4 on 4 channel models). When you turn on a channel, the
Channel menu opens. You can then set up the vertical settings and controls for
the channel. When the channel is ON, the channel button is lit.
NOTE: Turn a trace off by pressing the channel front panel button again.
Setting Up the Display
You can access the Display menu pressing the DISPLAY front panel button.
Advertising