Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 91)

Operator’s Manual
922131-00 Rev A 85

Return - Press the Return option and the Pass/Fail menu is
shown.
4. Press the Return option button or the Utility front panel button and the
Utility menu is shown.
Using Record
The Record function can record the input waveform from CH1 and CH2 (also,
CH3 and CH4 on four channel versions), with a maximum record length of
2500 frames. This keeps you from having to watch the signal when capturing
abnormal signals over a long period of time.
Access the Record function by pressing the corresponding option button on
the Utility menu. The Record menus are then shown.
The Record function operates in three Modes: Off, Record, and Playback. As
shown previous, no option button controls are available when the Record's
Mode is set to Off.