Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 59)

Operator’s Manual
922131-00 Rev A 53
Creating Reference Waveforms
Two reference waveforms (REFA and REFB) can be created and saved into
internal memory on the oscilloscope.
Reference waveforms can be saved and recalled from volatile memory for
quick comparative analysis.
NOTE:

When reference waveforms are recalled from internal memory, their
horizontal position and scale cannot be adjusted.

However, the oscilloscope does display the horizontal and vertical
scales of the recalled reference waveforms at the bottom of the display.

X-Y mode waveforms are not stored as reference waveforms.
1. Press the REF front panel button. The REF WAV menu opens.
2. Press the Source option button to select the input signal channel.
3. Use the lower REF A option button to turn the reference waveform On
or Off.