Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 93)

Operator’s Manual
922131-00 Rev A 87
Record Menu (with Mode Set to Play Back) - Page 1/2
Press the Mode option button and select Play Back. The Record menu (with
Mode set to Play Back) - Page 1/2 is shown and contains the following option
button controls (in addition to Mode).
1. Press the Operate option button to Start/Stop playback.
NOTE: A play: 1 counter is shown on the upper-left part of the grid
display area which counts the number of record frames to your
recorded End Frame option button control (set on PlayBack Page 2/2)
amount. If your play mode is set to Circular (repeat) the counter
continually cycles. Otherwise, if using the Single Time play mode, the
counter reaches the end frame amount and stops.
2. Press the Play Mode option button to choose from Circular (repeat) or
Single time (play once, and then stop) modes.
3. Press the Interval option button and use the Adjust front panel knob to
dial in the desired interval between record frames for the playback of
your recorded waveforms.