Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 67)

Operator’s Manual
922131-00 Rev A 61
Saving Data as a .CSV File
You can save waveform data as a comma-separated value (.CSV) file. You can
then use this information in other applications, such as Microsoft Excel. The
.CSV file contains the data points (horizontal and vertical information) of the
displayed waveform. You can also choose to save these parameters to the
.CSV file:
Record Length
Sample Interval
Trigger Point
Vertical Units
Vertical Scale
Vertical Offset Horizontal Units
Horizontal Scale
Model Number
Serial Number
Software Version
1. Press the Save/Recall front panel button. The SAVE/REC menu opens.
2. Press the Type option button and select CSV.
3. Press the Data Depth option button and select Maximum or Displayed.
These values correspond to all waveform data for the channel or just
the exact waveform data shown within the grid display, respectively.
4. Press the Para Save option button and select On or Off. Turning on Para
Save (short for Parameter Save) retains additional data values into your
.CSV file.

Values with Para Save turned Off include Source (Channel),
Second (Time in Seconds), and Volt (Amplitude in Volts).

Additional Values with Para Save turned On include Record
Length, Sample Interval, Vertical Unit, Vertical Scale, Vertical
Offset, Horizontal Units, Horizontal Scale, Model Number, Serial
Number, and Software Version.