Teledyne LeCroy WaveAce 1000_2000 - Manual (Page 62)

WaveAce 1000/2000
56 922131-00 Rev A
Recalling Setups
1. If you're not already on the SAVE/REC menu, press the Save/Recall
front panel button and the SAVE/REC menu is shown.
2. Press the Type option button and select Setups.
3. Recall your setup either from your Device (meaning internal memory on
your WaveAce) or from a File (stored on a USB memory device) using
the following methods.
Recalling Setups from Internal Memory

Press the Save To option button to select Device.

Press the Setup... option button or turn the Adjust front panel
knob to select the number (No. 1 - No. 20) assigned to the setup
you want to recall.

Press the Recall option button and the selected Setup is recalled
from internal memory. The oscilloscope briefly shows a Read
Data Success! message on the lower part of the grid display area.
Recalling Setups from a USB Memory Device

Insert the USB memory device and press the Save To option
button to select File.

Press the Recall option button and the SAVE ALL screen is
shown. See Using the SAVE ALL Screen (on page 67) to continue
recalling from your USB memory device.