Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 106)

88 Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Adding target tape LUNs for encryption
2
FIGURE 78 Encryption Targets dialog box
3. Select a target tape storage device from the Encryption Targets table, then click LUNs.
The Encryption Target Tape LUNs dialog box displays ( Figure 79 ).
FIGURE 79 Encryption Target Tape LUNs dialog box
4. Click Add.
The Add Encryption Target Tape LUNs dialog box displays ( Figure 80 ). All LUNs in the storage
device that are visible to hosts are listed in the table. LUNs are identified by the Host world
wide name, LUN number, Volume Label Prefix number, and Enable Write Early ACK and Enable
Read Ahead status. The LUN numbers may be different for different hosts.