Backing up the certificates, Figure 32 – Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) User Manual
Page 62
44
Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Steps for connecting to a KMIP appliance (SafeNet KeySecure)
2
FIGURE 32
Import Signed Certificate dialog box
3. Browse to the location where the signed certificate is stored, then click OK.
The signed certificate is stored on the switch.
Backing up the certificates
1. From the KeySecure Management Console, select the Device tab, then select Maintenance >
Backup & Restore > Create Backup.
The Backup and Restore page displays (
FIGURE 33
KeySecure Backup and Restore page
2. Select the server certificate from the list. (The example is using “Safenet75ServerReq”.)
3. Select the local CA from the list. (The example is using “SafeNetCA”.)
4. Select the High Security and FIPS Status Server check boxes, then click Continue.
A list of backup device items displays (