Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) User Manual
Page 72
54
Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Creating an encryption group
2
Using this dialog box, you can select a key vault for the encryption group that contains the
selected switch. Prior to selecting your Key Vault Type, the selection is shown as None. The
dialog box contains the following information:
•
Key Vault Type:
If an encryption group contains mixed firmware nodes, the Encryption Group Properties
Key Vault Type name is based on the firmware version of the group leader.
•
Options are:
•
NetApp Link Key Manager (LKM)
•
RSA Data Protection Manager (DPM)
•
HP Secure Key Manager (SKM)
•
Thales e-Security keyAuthority (TEKA)
•
Tivoli Key Lifecycle Manager (TKLM)
•
Key Management Interoperability Protocol (KMIP): Any KMIP-compliant server can be
registered as a key vault on the Brocade Encryption Switch after setting the key vault
type to KMIP.
Currently, only KMIP with SafeNet KeySecure for key management (SSKM) native
hosting LKM is supported.
Before selecting KMIP as the key vault type, all nodes in an encryption group must be
running Fabric OS 7.1.0 or later.
8. Select Key Management Interoperability Protocol (KMIP) as the Key Vault Type. Proceed to
“Configuring key vault settings for Key Management Interoperability Protocol (KMIP)”