Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 56)

38 Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Steps for connecting to a KMIP appliance (SafeNet KeySecure)
2
Creating a cluster
1. From the KeySecure Management Console, select the Device tab, then select Device
Configuration > Cluster.
The Cluster Configuration page displays ( Figure 26 ).
FIGURE 26 KeySecure Cluster Configuration page
2. Under Create Cluster, enter a user-defined password in the fields provided, then click Create.
The Cluster Configuration page refreshes; the new cluster information is displayed in the
Cluster Members table (
Figure 27 ).
3. Verify the cluster status is shown as Active.