Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 314)

296 Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Encrypted LUN states
A
LUN_ENCRYPT Encryption enabled The tape medium is present, and is in
ciphertext (encrypted). The encryption
switch or blade has full read/write
access, because its current tape
policy for the medium is also
encrypted. See the Encryption Format
field to find out if tape is encrypted in
native mode or DataFort-compatible
mode.`
LUN_DIS_NO_LICENSE Disabled (Third party license is
required) The tape medium or its current tape
policy is DataFort-compatible mode,
but The encryption switch or blade
does not have the appropriate license
to enable this feature. The tape
medium is neither readable nor
writable.
LUN_CFG_MISMATCH_CLEARTEXT Read only (Cleartext tape, policy
mismatch The tape medium is clear text, but
current tape policy is not. Mixed
modes are not allowed, so the
medium is only readable. Attempts to
write result in a RASLOG and
ABORTED COMMAND returned to
host.
LUN_CFG_MISMATCH_COMPATIBLE Read only (DF_compatible tape,
policy mismatch) The tape medium is encrypted and
DataFort-compatible, but the current
tape policy is not. Mixed modes are
not allowed, so the medium is only
readable. Attempts to write result in a
RASLOG and ABORTED COMMAND
returned to host.
LUN_CFG_MISMATCH_NATIVE Read only (Native encrypted
tape, policy mismatch)) The tape medium is encrypted and
native-mode, but the current tape
policy is not. Mixed modes are not
allowed, so the medium is only
readable. Attempts to write result in a
RASLOG and ABORTED COMMAND
returned to host.
TABLE 21 Tape LUN states