Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 42)

24 Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Smart card usage
2
FIGURE 12 Smart Card asset tracking dialog box
The Smart Cards table lists the known smart cards and the details for the smart cards. These
details include the following:
• Card ID: Lists the smart card ID, prefixed with an ID that identifies how the card id used.
For example, rc.123566b700017818, where rc stands for recovery card.
• Card Type: Options are: System card, Authentication card, and Recovery set.
• Usage: Usage content varies based on the card type.
• For Authentication cards, the Usage column shows the number of groups for which the
card is registered.
• For System cards, the Usage column shows the number of encryption engines for
which the card is registered.
• For Recovery cards, the Usage column shows the group name and the creation date.
• First Name: The first name of the person (up to 64 characters) to whom the smart card is
assigned. All characters are valid in the editable columns, including spaces. Editing these
values in BNA does not modify the information that is stored on the card.
• Last Name: The last name of the person (up to 64 characters) to whom the smart card is
assigned. All characters are valid in the editable columns, including spaces. Editing these
values in BNA does not modify the information that is stored on the card.
• Notes: Miscellaneous notes (up to 256 characters) related to the smart card. Editing these
values in BNA does not modify the information that is stored on the card. Notes are
optional.
• Delete button: Deletes a selected smart card from BNA database.
NOTE
You can remove smart cards from the table to keep the Smart Cards table at a
manageable size, but removing the card from the table does not invalidate it; the smart
card can still be used.