Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 81)

Fabric OS Encryption Administrator’s Guide (KMIP) 63
53-1002747-02
Adding a switch to an encryption group
2
The dialog box contains the following information:
• Encryption Groups table: Enables you to select an encryption group in which to add a
switch.
• Member Switches table: Lists the switches in the selected encryption group.
NOTE
If you are creating a new encryption group, refer to “Creating an encryption group” on page 50.
FIGURE 55 Add Switch to Existing Encryption Group dialog box
5. Select the group in which to add the switch, then click Next.
The Specify Public Key Certificate (KAC) File Name dialog box displays ( Figure 56 ).