Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) User Manual
Page 173
Advertising
Fabric OS Encryption Administrator’s Guide (KMIP)
155
53-1002747-02
Configuring the Brocade Encryption Switch key vault setup (SafeNet KeySecure)
3
2. On the KeySecure, enter the same user name and password that was used in step 1.
FIGURE 116
KeySecure User & Group Configuration page
3. If no “brocade” group has already been configured, create a “brocade” group and add the new
user name to the group.
FIGURE 117
KeySecure User & Group Configuration - User List
Advertising