Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 83)

Fabric OS Encryption Administrator’s Guide (KMIP) 65
53-1002747-02
Adding a switch to an encryption group
2
FIGURE 58 Configuration Status dialog box
All configuration items have green check marks if the configuration is successful. A red stop
sign indicates a failed step. A message displays below the table, indicating the encryption
switch was added to the group you named, and the public key certificate is stored in the
location you specified.
7. Review important messages, then click Next.
The Error Instructions dialog box displays ( Figure 59 ). Instructions for installing public key
certificates for the encryption switch are displayed. These instructions are specific to the key
vault type.