Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 145)

Fabric OS Encryption Administrator’s Guide (KMIP) 127
53-1002747-02
Viewing and editing encryption group properties
2
The Encryption Group Properties dialog box includes several tabs that are used to configure
the various functions for encryption groups. All tabs are visible for all key vault types with one
exception; the Link Keys tab is visible only if the key vault type is NetApp LKM. Unless
otherwise specified, the Encryption Group Properties dialog box opens with the General tab
displayed.
FIGURE 105 Encryption Group Properties dialog box
The dialog box contains the following information:
• General tab: For a description of the dialog box, refer to “General tab” on page 128.
• Members tab: For a description of the dialog box, refer to “Members tab” on page 130.
• Security tab: For a description of the dialog box, refer to “Security tab” on page 133.
• HA Clusters tab: For a description of the dialog box, refer to “HA Clusters tab” on page 135.
• Tape Pools tab: For a description of the dialog box, refer to “Tape Pools tab” on page 137.
• Engine Operations tab: For a description of the dialog box, refer to “Engine Operations tab” on
page 139.