Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 230)

212 Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Single encryption switch, two paths from host to target
4
Single encryption switch, two paths from host to target
Figure 120 shows a basic configuration with a single encryption switch providing encryption
between one host and one storage device over two the following two paths:
• Host port 1 to target port 1, redirected through CTC T1.
• Host port 2 to target port 2, redirected through CTC T2.
Host port 1 is zoned with target port 1, and host port 2 is zoned with target port 2 to enable the
redirection zoning needed to redirect traffic to the correct CTC.
FIGURE 120 Single encryption switch, two paths from host to target