Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 70)

52 Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Creating an encryption group
2
FIGURE 43 Designate Switch Membership dialog box
5. For this procedure, verify that Create a new encryption group containing just this switch is
selected, then click Next.
NOTE
If you are adding a switch to an encryption, refer to “Adding a switch to an encryption group” on
page 61.
The Create a New Encryption Group dialog box displays ( Figure 44 ).
FIGURE 44 Create a New Encryption Group dialog box