Figure 85 – Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) User Manual
Page 114
96
Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Tape LUN statistics
2
FIGURE 85
Target Tape LUNs dialog box
4. Select the LUN or LUNs for which to display or clear statistics, then click Statistics.
The Tape LUN Statistics dialog box displays (
). The statistic results based on the LUN
or LUNs you selected are listed in the table. Tape LUN statistics are cumulative.
FIGURE 86
Tape LUN Statistics dialog box
The dialog box contains the following information:
•
LUN #: The number of the logical unit for which statics are displayed.
•
Tape Volume/Pool: The tape volume label of the currently-mounted tape, if a tape session
is currently in progress.
•
Tape Session #: The number of the ongoing tape session.
•
Uncompressed blocks: The number of uncompressed blocks written to tape.
•
Compressed blocks: The number of compressed blocks written to tape.
•
Uncompressed Bytes: The number of uncompressed bytes written to tape.
•
Compressed Bytes: The number of compressed bytes written to tape.
•
Host Port WWN: The WWN of the host port that is being used for the write operation.