Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) - Manual (Page 69)

Fabric OS Encryption Administrator’s Guide (KMIP) 51
53-1002747-02
Creating an encryption group
2
5. Select Security Settings.
6. Confirm the configuration.
7. Configuration Status.
8. Read Instructions.
FIGURE 42 Configure Switch Encryption wizard - welcome screen
4. From the Configure Switch Encryption welcome screen, click Next to begin.
The Designate Switch Membership dialog box displays ( Figure 43 ). The dialog box contains the
following options:
• Create a new encryption group containing just the switch: Creates an encryption group for
the selected switch
• Add this switch to an existing encryption group: Adds the selected switch to an encryption
group that already exists