Setting fips compliance – Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) User Manual
Page 49
Advertising
Fabric OS Encryption Administrator’s Guide (KMIP)
31
53-1002747-02
Steps for connecting to a KMIP appliance (SafeNet KeySecure)
2
Setting FIPS compliance
1. From the KeySecure Management Console, select the Security tab, then select Advanced
Security, > High Security.
The High Security Configuration page displays (
).
FIGURE 15
KeySecure High Security Configuration page
2. Under FIPS Compliance, set FIPS Compliance to Yes.
This ensures that only TLS 1.0 connections are supported between the Brocade Encryption
Switch and the KeySecure.
Advertising