Vmware esx server deployments – Brocade Fabric OS Encryption Administrator’s Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) User Manual

Page 242

Advertising
background image

224

Fabric OS Encryption Administrator’s Guide (KMIP)

53-1002747-02

VMware ESX server deployments

4

VMware ESX server deployments

VMware ESX servers may host multiple guest operating systems. A guest operating system may
have its own physical HBA port connection, or it may use a virtual port and share a physical HBA
port with other guest operating systems.

Figure 130

shows a VMware ESX server with two guest operating systems where each guest

accesses a fabric over separate host ports.

There are two paths to a target storage device:

Host port 1 to target port 1, redirected through CTC T1.

Host port 2 to target port 2, redirected through CTC T2.

Host port 1 is zoned with target port 1, and host port 2 is zoned with target port 2 to enable the
redirection zoning needed to redirect traffic to the correct CTC.

FIGURE 130

VMware ESX server, One HBA per guest OS

Advertising