HP StorageWorks XP Remote Web Console Software - Manual (Page 108)

108 Continuous Access XP Journal
• JNLG-MirrorID: Journal group number and mirror ID. The number on the left of the hyphen (-) is a
journal group number. The number on the right of the hyphen is a mirror ID.
This column is blank if the volume in the local disk array is not a primary or secondary volume.
• S/N(CTRLID): Remote disk array’s serial number and controller ID. The controller ID is enclosed by
parentheses.
This column is blank if the volume in the local disk array is not a primary nor secondary volume.
NOTE: The controller ID for an XP 12000 disk array is 4.
This column can be blank while the pair is in transition to the SMPL status. To display the latest
information in this column, refresh the screen.
• Pair Port-G-ID-LUN: Remote disk array’s data volume.
This column indicates a primary volume if the remote disk array is a primary disk array.
This column indicates a secondary volume if the remote disk array is a secondary volume.
The following is an example of an entry in this column:
Figure 51 Information in pair Port-G-ID-LUN column in Pair Operation pane
NOTE: If a logical volume is an external volume, # appears after the LDEV number. For more
information about external volumes, see the HP StorageWorks External Storage XP User Guide.
This column is blank if the volume in the local disk array is not a primary or secondary volume.
• Pair JNLG: Remote disk array’s journal group number. This column is blank if the volume in the local
disk array is not a primary or secondary volume.
• CTG: Consistency group number. This column is blank if the volume in the local disk array is not a
primary or secondary volume.
• Err Lv.: Range of the pair split when an error occurs.
• Group: If an error occurs with this pair, all pairs in the mirror where this pair belongs are split.
• LU: If an error occurs with this pair, only this pair is split.
• Prog./Sync.: If the volume in the local disk array is a primary data volume, this column displays the
progress of an initial copy operation.
If the volume in the local disk array is a secondary data volume, this column displays the following
information:
• If the volume pair is not split, this column displays nothing.
Suspending The primary and secondary volumes are not synchronized. This pair is in transition from the
PAIR or COPY status to the PSUS/PSUE status.
Deleting The primary and secondary volumes are not synchronized. This pair is in transition from the
PAIR, COPY, or PSUS/PSUE status to the SMPL status.
1 Port
2 Host group number
3 LUN (logical unit number)
4 Logical volume ID