HP StorageWorks XP Remote Web Console Software - Manual (Page 97)

Continuous Access XP Journal user guide 97
• Blank: Journal volumes and data volumes are not registered in this journal group.
• JNL Volumes: Number of journal volumes registered in the journal group.
• JNL Capacity: Total capacity of all registered journal volumes.
• Data Volumes: Number of data volumes associated with the journal group.
• Data Capacity: Total capacity of all data volumes.
• Meta/Data Ratio: Ratio of metadata area to journal data area. For example, if 16 is displayed, the
ratio of metadata area to journal data area is 1:16. If 32 is displayed, the ratio of metadata area to
journal data area is 1:32.
• Extent: Number of extents.
• Inflow Control: Indicates whether inflow of update I/Os to the journal volume is restricted (in other
words, whether to slow delay response to hosts).
• Yes: Inflow is restricted.
• No: Inflow is not restricted.
Inflow Control displays nothing if the journal group is a restore journal group.
• Data Overflow Watch (sec): Time (in seconds) for monitoring whether metadata and journal data are
full.
NOTE: Data Overflow Watch displays nothing when one of the following conditions is satisfied:
• Inflow Control is No.
• The journal group is a restore journal group.
• Copy Pace: Pace for an initial copy activity for one volume: High, Medium, or Low.
NOTE:
• By default, the pace for an initial copy activity is Low.
• Copy Pace displays nothing if the journal group is a restore journal group.
• Use of Cache: Indicates whether journal data is stored in the restore journal group in cache.
• Use: Journal data is stored in cache.
NOTE: When there is insufficient space in cache, journal data is also stored in the journal volume.
• Not Use: Journal data is not stored in cache.
CAUTION: This setting does not take effect on master journal groups. However, if you use the RAID
Manager
horctakeover
command to change a master journal group to a restore journal group,
this setting takes effect on the journal group.
• Speed of Line: Line speed of data transfer. The unit is Mbps (megabits per second).
One of the following is displayed: 256, 100, or 10.
CAUTION: This setting does not take effect on master journal groups. However, if you use the RAID
Manager
horctakeover
command to change a master journal group to a restore journal group,
this setting takes effect on the journal group.
• JNL Volumes: List of registered journal volumes.
• Parity Group: Parity group where a journal volume belongs.
• CU:LDEV: Journal volume’s CU and LDEV number. The CU number is displayed to the left of the
colon (:). The LDEV number is displayed to the right of the colon.