HP StorageWorks XP Remote Web Console Software - Manual (Page 92)

92 Continuous Access XP Journal
• Operation: Indicates the operation that will occur when you click Apply.
• Edit JNL Volumes: Register or delete journal volumes
• Change JNL Option: Change journal group options
• Delete JNL Groups: Delete journal group
• Pairsplit -r: Split a mirror
• Pairresync: Restore a mirror
• Pairsplit -S: Delete a mirror
• Blank: Nothing occurs when you click Apply
• Preset: The number to the left of the slash (/) is the number of items displayed in the Preset list. The
number to the right of the slash is the maximum number of items that can be displayed in the Preset
list. For example, if Preset 010/256 is displayed, you can add another 246 items to the Preset list.
• Apply: Applies settings in the Preset list to the disk arrays.
• Cancel: Cancels settings in the Preset list.
NOTE: Information on the Journal Operation pane is updated when you do one of the following:
• Select another tab, and reselect the Journal Operation tab.
• Click Refresh (top right of Command View XP or XP Remote Web Console pane).
• Click Apply.
• Select Modify mode when you are in View mode.
Registering journal volumes in journal groups
To perform remote copy operations with Continuous Access XP Journal, the primary site administrator must
register journal volumes in journal groups in the primary disk array. Also, the secondary site administrator
must register journal volume in journal groups in the secondary disk array. One journal group can contain
up to 16 journal volumes.
If you are logged onto an XP10000, you can perform this operation only on journal groups that have a
number below 10.
Primary and secondary disk array administrators must perform the following procedure:
1. Ensure that the Command View XP or XP Remote Web Console main pane is in Modify mode. For
more information, see the HP StorageWorks Command View XP User Guide for XP Disk Arrays or the
HP StorageWorks XP Remote Web Console User Guide for XP12000/XP10000.
2. Ensure that the Journal Operation pane is displayed (” Displaying the Journal Operation pane ” on
page 88.)
3. In the tree of the Journal Operation pane, do one of the following:
• To register new volumes to a journal group in which journal groups are already registered, select
the journal group from below Registered.
CAUTION: You can register volumes only when the journal group’s attribute is Initial or the journal
group’s status is Active or Stop.
• To register volumes to a journal group in which journal groups have not been registered, select the
journal group from below Free.
NOTE: You cannot select more than one journal group.
4. Do one of the following:
• In the tree, right-click the selected journal group, and select Edit JNL Volumes.
• In the upper-right list, right-click the desired journal group, and select Edit JNL Volumes.