HP StorageWorks XP Remote Web Console Software - Manual (Page 78)

78 Continuous Access XP Journal
2. Select a remote disk array from below Subsystem in the tree. The list displays logical paths. Each row in
the list indicates one logical path.
The list displays the following:
• Path Gr. ID: Path group ID. The icon indicates the status of the path:
• M-R Path: Channel type of the logical paths between the local and remote disk arrays. This column
always displays Fibre.
• Status: Indicates whether the logical path is in a normal status.
• Normal: The logical path is in a normal status. No failure occurred at the logical path.
• Failed: A failure occurred at the logical path.
• Port: Local disk array’s port number.
• Pair-Port: Remote disk array’s port number.
Displaying information about ports on local disk arrays
Use the DKC Operation pane to display information about ports on the local disk array.
1. In the Switch Display box, select Port. The tree displays a list of channel adapters and port attributes.
2. Do one of the following in the tree:
• Select Subsystem. The list displays all ports on the local disk array.
• Select a channel adapter. The list displays ports on the channel adapter.
• Select a port attribute. The list displays ports that have the selected port attribute.
Figure 38 DKC Operation pane, Port option
• Tree: Lists channel adapters and ports on the local disk array.
The logical path is in a normal status
A failure occurred at the logical path
channel adapter (Fibre Channel interface)
target port
RCU target port
initiator port
external port