HP StorageWorks XP Remote Web Console Software - Manual (Page 93)

Continuous Access XP Journal user guide 93
5. In the Free Volumes list of the Edit JNL Volumes pane, select the volumes you want to register.
In the Free Volumes list, one row represents one volume. If you cannot find the volumes you want to
register, do one of the following:
• Select Parity Group, enter a parity group number in the text boxes to the right, and click Show. The
list displays volumes in the specified parity group. Select the volumes you want to register.
• Select CU, and select a CU number from the drop-down list to the right. The list displays volumes in
the specified CU. Select the volumes you want to register.
NOTE: The Free Volume list only displays OPEN-V volumes and does not display external volumes.
For more information about CLPR0, see the HP StorageWorks XP Disk/Cache Partition User Guide.
6. Click Add. The JNL Volumes list displays the volumes you want to register. The Operation column of the
list displays Add.
NOTE: One journal group can only contain volumes belonging to the same CLPR.
7. Click Set to close the Edit JNL Volumes pane.
8. In the Preset list, check the settings you made.
• To add volumes to register, select and right-click a volume in the Preset list, and select Modify. A
pane appears where you can add volumes.
• To cancel registering a volume, select and right-click the volume, and select Cancel.
• If necessary, repeat steps
step 3 through step 8 to add volumes to other journal groups.
9. Click Apply to register journal volumes. After volumes are registered, the journal groups are displayed
below Registered in the tree.
NOTE: If an error occurs, the right-most column of the Preset list displays the error code. To view detailed
information about the error, right-click the error code, and select Error Detail. An error message appears
providing detailed information about the error.
Figure 45 Edit JNL Volumes pane
The Edit JNL Volumes pane displays the following: