HP StorageWorks XP Remote Web Console Software - Manual (Page 67)

Continuous Access XP Journal user guide 67
Continuous Access XP secondary sites to primary sites (in 3DC cascading configurations) ” on
page 68.
Figure 30 Recovering from disaster at primary sites
Changing to 3DC multi-target configurations after recovering from primary site failures
If you follow the instructions in ” Recovering from primary site failures ” on page 66 and the system does not
change to a 3DC cascading configuration, you can change the system to a 3DC multi-target configuration
after removing failures from the primary site and other locations. In the resulting 3DC multi-target
configuration, the former Continuous Access XP secondary volume is the primary volume.
To change the system to a 3DC multi-target configuration:
1. Use RAID Manager to delete the former Continuous Access XP Journal pair.