HP StorageWorks XP Remote Web Console Software - Manual (Page 88)

88 Continuous Access XP Journal
8. Click OK to close the message.
9. In the Preset list, check the settings you made.
• The Preset list displays the specified remote disk arrays. One row indicates one remote disk array.
• To cancel removal of the relationship, select and right-click the remote disk array in the Preset list,
and select Cancel.
10. Click Apply to remove the relationship.
Using journal groups
To introduce Continuous Access XP Journal in your system and configure your system for remote copy
operations, the primary and secondary site administrators must configure journal groups, ports, and
logical paths. Also, these administrators must register journal volumes in journal groups. During Continuous
Access XP Journal remote copy operations, data in primary volumes are copied by journal volumes to
secondary volumes.
When configuring journal groups, the administrators must do the following:
• ” Displaying the Journal Operation pane ” on page 88
• ” Registering journal volumes in journal groups ” on page 92
When configuring journal groups, the administrator should do the following when necessary:
• ” Deleting journal volumes from journal groups ” on page 95
• ” Displaying detailed information about journal groups ” on page 96
• ” Changing options for journal groups ” on page 99
• ” Deleting journal groups ” on page 102
When Continuous Access XP Journal is used for remote copy operations, the administrator should do the
following when necessary:
• ” Splitting mirrors (Pairsplit-r: suspending copy operations) ” on page 103
• ” Restoring mirrors (Pairresync: resuming copy operations) ” on page 104
• ” Deleting data volumes from mirrors (Pairsplit-S: ending copy operations) ” on page 105
NOTE: Throughout this chapter, the primary and secondary disk arrays are sometimes referred to as local
disk arrays and remote disk arrays. If you are logged into the primary disk array and are using Continuous
Access XP Journal, the primary disk array is a local disk array and the secondary disk array is a remote
disk array. If you are logged into the secondary disk array and are using Continuous Access XP Journal,
the secondary disk array is a local disk array and the primary disk array is a remote disk array.
Displaying the Journal Operation pane
To configure journal groups, use the Journal Operation pane of Continuous Access XP Journal.
Continuous Access XP Journal has not been started
1. Use your Web browser to display the storage device list. In the storage device list, select the disk array
to log into. Enter a user name and the password, and click OK. The Command View XP or XP Remote
Web Console main pane appears. For more information, see the HP StorageWorks Command View XP
User Guide for XP Disk Arrays or the HP StorageWorks XP Remote Web Console User Guide for
XP12000/XP10000.
2. On the Command View XP or XP Remote Web Console main pane, select the Continuous Access XP
Journal button ( ). Continuous Access XP Journal starts.
3. Select the Journal Operation tab. The Journal Operation pane appears.
Continuous Access XP Journal has already been started
1. Select the Journal Operation tab. The Journal Operation pane appears.