HP StorageWorks XP Remote Web Console Software User Manual
Page 111
Continuous Access XP Journal user guide 111
NOTE:
You can use the snapshot function only while the client file access is enabled. When the client file
access is not enabled, the Snapshot button is not displayed on the Pair Operation pane.
The following is an example of a snapshot file.
NOTE:
If a logical volume is an external volume, # appears after the LDEV number. For more
information about external volumes, see the HP StorageWorks External Storage XP User Guide.
To save information in a snapshot file:
1.
To filter the list, see ”
Filtering information in the list in the Pair Operation pane
2.
In the Pair Operation pane, click Snapshot. A message appears asking if you want to save volume pair
information in a snapshot file.
3.
Click OK to close the message. A pane appears prompting you to save a snapshot file.
4.
Enter the snapshot file name, and click Save. A message appears when Continuous Access XP Journal
finishes saving the snapshot file.
5.
Click OK to close the message.
<Pair Status at 30/04/2005 12:34:56>
Port Gr(Name) LUN Vol Status JNG Mr S/N(CNTL) Port Gr LUN Vol JNG Type CTG ErrLv Sync CLPR
CL3-E 00(3E-G00 ) 000 00:00 PAIR 01 02 11111(04) CLG-R FF 1FF 3F:FF F6 P-VOL 09 Group 100 00:CLPR0
CL3-E 00(3E-G00 ) 008 00:08 SMPL 01:CLPR1
CL3-E 00(3E-G00 ) 009 00:09 PSUS 10 02 11111(04) CLG-R FF 1F6 3F:F6 ED P-VOL 12 LU 80 02:CLPR2
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16) (17) (18)
1
Port in the local disk array
2
Host group number and name in the local disk array (host group name is limited to a maximum of 16
characters)
3
LU number in the local disk array
4
CU and LDEV numbers in the local disk array
5
Status of the pair
6
Journal group number in the local disk array
7
Mirror ID
8
Remote disk array’s serial number and controller ID
9
Port number in the remote disk array
10
Host group number in the remote disk array
11
LU number in the remote disk array
12
CU and LDEV numbers in the remote disk array
13
Journal group number in the remote disk array
14
Type of volumes in the local disk array
15
Consistency group number
16
Error level
17
Progress of copy operation or synchronization rate (that is, concordance rate) between data volume before
pair was split and data volume after pair was split.
18
CLPR number and name