HP HSG Array Controller - Manual (Page 133)

6-26 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: g-ch6 Zoning Last Saved On: 4/7/99 12:36 PM
Configuration Management Commands
Configuration Management commands allow you to configure the zones.
Table 6-5 summarizes the commands.
Table 6-5
Configuration Management Command Descriptions
Command Description
cfgClear Clears all zone configurations
cfgDisable Disables a zone configuration
cfgEnable Enables a zone configuration
cfgSave Saves zone configurations in flash
cfgShow Shows zone configuration definition
cfgClear
Figure 6-19 shows the cfgClear command should be used with caution. If a
zone configuration is enabled, it is first disabled. All defined zone objects are
then deleted. The zone configuration stored in flash is then erased. After this
command has been executed there is no longer any zone information stored in
the Fabric.
CAUTION: Use of this command removes all zone information from the Fabric.
admin> cfgClear
value = 0 = 0x0
Figure 6-19. cfgClear Command