Port enable, Close telnet, Reboot – HP HSG Array Controller User Manual
Page 54
3-20 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
Port Enable
Pressing <Enter> while the
Port Enable
message is displayed opens a
submenu where you select the port.
Operation Menu:
Port Enable
Pressing <Enter>, while the selected port is displayed, enables the selected
port. The LED associated with selected port changes from amber to green
indicating the port has been enabled. When FL_Ports are enabled, the port
initializes the loop attempting to be the master.
Close Telnet
Pressing <Enter> while the
Close Telnet Session
message is
displayed opens a submenu where you select to close an open Telnet session.
Operation Menu:
Close Telnet Session
Pressing <Enter>, while the
Close Telnet Session
message is
displayed closes the open Telnet session.
Close Telnet Session
Accept? Yes No
Reboot
Pressing <Enter> while the
Reboot
message is displayed causes the Switch
to reboot immediately.
Operation Menu:
Reboot
Rebooting the Switch causes it to immediately exit all current processes and
states, and start the POST process. Exercise caution using the reboot command
on a Switch connected to the Fabric.
Pressing <Enter>, while the screen above is selected, displays:
Reboot
Accept? Yes No