HP HSG Array Controller - Manual (Page 219)

Telnet Commands B-79
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
interfaceShow
Figure B-55 shows the interfaceShow command which displays FSPF
interface information. This includes static information about the port (for
example, variables allocated even when a port is down), and “neighbor”
information which includes variables associated with the remote Switch
connected to the port. A FSPF interface corresponds to an E_Port. The fields
are described in Table B-18.
With no parameters, it shows the information for all Switch interfaces.
The command syntax is interfaceShow <port#>