HP HSG Array Controller - Manual (Page 59)

Managing the Switch 3-25
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
This display shows port throughput on the Switch. The throughput number
represents the number of bytes received plus the number of bytes transmitted
per second and is displayed as bytes/second (B/s), kilobytes/second (KB/s) or
megabytes/second (MB/s). You can select different ports using <Up> and
<Down>, from port 0 to port 15, and all ports, and is used to monitor a single
or the aggregate of all port(s) performance.
Temperature
Pressing <Enter>, while Temperature is selected, displays:
Temperature:
36 34 37 36 35
NOTE: Using the <Up> or <Down> buttons, the user can toggle between Centigrade
(default) and Fahrenheit temperature values.
SHR-1211
2
1
3
1
4
3
2
5
Figure 3-4. Temperature Sensor Locations on Motherboard
The numbered temperature sensor locations on the motherboard, shown in
Figure 3-3, correspond to the temperature in the display. Sensor number 1
corresponds to the first temperature, 36, sensor number two corresponds to the
second temperature, 34, and so forth.