HP HSG Array Controller - Manual (Page 52)

3-18 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
Open/Opened BB_credit
Pressing <Enter>, while Open/Opened BB_credit is selected, displays:
Open/Opened BB_credit
4
The number is used to specifies the maximum number of R_RDY's an FL_Port
can issue (provided buffers are available) at the beginning of each loop
tenancy. Configuring a higher value allows NL_Ports to send out more frames
to the Fabric in a loop, and can increase performance especially in bigger
loops.
Frame Collection
Pressing <Enter>, while Frame Collection is selected, displays:
Frame Collection
Method? Bundle/Piling
This command specifies two frame collection methods, bundle and piling.
Using bundling, frames are separated in different queues based on
source/destination pairs. Piling accumulates frame based on destination
AL_PA. Piling can minimize loop traffic by reducing overhead and increases
the loop efficiency.
To set, press <Tab/Esc> for Bundle or <Enter> for Piling.
Reset to Default
Pressing <Enter>, while Reset to Default is selected, displays:
Reset to Default
Accept? Yes No
Selecting the Yes option then pressing <Enter> causes all values in the
Configuration Menu to reset to default conditions. Once the Ethernet IP
address and the switchname are changed, they are not reset to default values.
NOTE: Resetting the Switch to default causes all configuration settings, names, and
passwords entered to be reset to default settings, except the IP address and switchname.