HP HSG Array Controller - Manual (Page 204)

B-64 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
admin> crossPortTest
Running Cross Port Test .......*****
One or more ports is not active,
please doublecheck fibres on all ports.
Port SNMP Physical Flags
-------------------------------
0: Offline Port_Flt PRESENT L_PORT
1: Offline No_Module PRESENT L_PORT CBL_LB
2: Offline No_Light PRESENT L_PORT CBL_LB
3: Offline Port_Flt PRESENT L_PORT
4: Offline No_Module PRESENT G_PORT
5: Offline No_Module PRESENT G_PORT
6: Offline No_Module PRESENT G_PORT
7: Offline No_Module PRESENT G_PORT
8: Offline No_Light PRESENT G_PORT
9: Offline No_Light PRESENT G_PORT
10: Offline No_Light PRESENT G_PORT
11: Offline No_Light PRESENT G_PORT
12: Offline No_Light PRESENT G_PORT
13: Offline No_Light PRESENT G_PORT
14: Offline No_Light PRESENT G_PORT
15: Offline No_Light PRESENT G_PORT
16: Testing In_Sync PRESENT ACTIVE G_PORT INT_LB
value = 65536 = 0x10000
Figure B-42. crossPortTest Command Example
If you do not include the nFrames parameter, the cross port test runs until you
press <Return>.
Pressing <Return> after typing the command starts the test.
If the test does not find an error, there is no output during the Telnet session.