HP HSG Array Controller - Manual (Page 171)

Telnet Commands B-31
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
ifShow
Figure B-15 shows the ifShow command which displays network interface
information. The display includes three sections organized by interface:
■ ei – Ethernet 10-BaseT port
■ lo – loopback interface
■ fc – Fibre Channel. This section is omitted if IP over Fibre Channel is
not configured
admin> ifShow
ei (unit number 0):
Flags: (0x63) UP BROADCAST ARP RUNNING
Internet address: 192.168.64.146
Broadcast address: 192.168.64.255
Netmask 0xffffff00 Subnetmask 0xffffff00
Ethernet address is 00:60:69:00:04:64
Metric is 0
Maximum Transfer Unit size is 1500
2089 packets received; 156 packets sent
0 input errors; 0 output errors
3 collisions
lo (unit number 0):
Flags: (0x69) UP LOOPBACK ARP RUNNING
Internet address: 127.0.0.1
Netmask 0xff000000 Subnetmask 0xff000000
Metric is 0
Maximum Transfer Unit size is 4096
0 packets received; 0 packets sent
0 input errors; 0 output errors
0 collisions
value = 18 = 0x12
Figure B-15. ifShow Command Example